RDR 30mm CVK Carburetor Intake Boot - 60mm Bolt Spacing

This RDR 30mm CVK Carburetor Intake Boot is a replacement rubber coupler that connects a CVK-style carburetor up to 30mm to an intake manifold with a two-bolt, 60mm-spaced flange. If your old boot is cracked, hardened or leaking air (think hard starting, a high idle or a lean surge), a fresh boot seals things back up.

Features

• Made for 30mm CVK carbs: Molded "CVK Ø30" on the boot.
• Two-bolt flange: 60mm hole spacing, with metal-sleeved bolt holes so the flange holds its shape when tightened.
• Hose clamp included: Stainless-style worm-drive clamp secures the carburetor.
• Bright red finish: Easy to spot and inspect.

Specifications

• Part number: 169-558
• MPN: F-48-1
• Carburetor type: CVK, up to 30mm
• Bolt hole spacing: 60mm
• Inner diameter, carb side: 35mm
• Inner diameter, manifold side: 30mm
• Includes: Intake boot and hose clamp
• Color: Red
• Brand: RDR

Model Fitment

Installation Notes

• Measure your manifold's bolt spacing and your carb's outlet before ordering.
• Tighten the flange bolts evenly, then snug the clamp on the carb. Don't overtighten it.
• After installing, spray a little carb cleaner around the boot while idling. If the idle changes, there's still an air leak.