The Universal Parts 12V 8.5AH YTX9-BS is a maintenance-free dry AGM battery with included acid pack, designed for full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, and off-road vehicles. Ships via FedEx Ground to the lower 48 states only (ORM-D regulated item).
Features
- Maintenance-free dry AGM design with included acid pack
- 12V / 8.5AH capacity
- CCA (Cold Cranking Amps): 120
- Sealed, spill-proof construction
- ORM-D regulated — FedEx Ground, lower 48 states only
Specifications
- Voltage: 12V
- Capacity: 8.5AH
- CCA: 120
- Length: 5.94 in (151mm)
- Width: 3.40 in (88mm)
- Height: 4.20 in (107mm)
- Weight: 7.4 lbs
Replaces These Part Numbers
26012-1261, 31500-156-001, 31500-HN1-003, 6MF8, CTX9-BS, ES9BS, GTX9-BS, LTX9-BS, M329BS, M429BS, PTX9-BS, XTAX9-BS, YTX9-BS
Activation Instructions
- Place battery on a level surface outside the vehicle.
- Remove the electrolyte container from the storage bag and remove the strip of caps — set aside for sealing later. Do not pierce or open the foil seals.
- Invert the container over the cell filler ports and push down firmly to break the foil seals. Hold level and allow electrolyte to flow until the container is empty.
- If flow stops, tap the container or battery case gently. Do not remove the container until completely empty.
- Remove the empty container and firmly press the strip of sealing caps flush into the filler ports by hand — do not use a hammer. Never remove caps or add water/electrolyte during service life.
- For batteries under 18AH, allow to stand 20–60 minutes before charging or installing.
Always wear gloves and eye protection when handling battery acid. Do not smoke during activation.
California Prop 65 Warning: www.p65warnings.ca.gov
Model Fitment
Full-size scooters, mopeds, ATVs, dirt bikes, motorcycles, and off-road vehicles requiring a YTX9-BS battery
