E300 & E300s

Model and version requirements

Match the exact model, production version and original part. Production version is not model year. The supported finder matches are listed below; retained items without a listed match still require confirmation.

• Universal Parts Battery Adapter for Razor Electric Vehicles (104-11)
  E300: Versions 5–10 and 12 only. Battery adapter harness for two cells in a 24V pack.
  E300S (Front & Rear): Versions 5–10 and 12 only. Battery adapter harness for two cells in a 24V pack.
• Universal Parts 6000-ZZ Wheel Bearing - 10x26x8mm (105-6)
  E300: Only an E300 wheel position originally using 6000-ZZ. Match bearing designation, 10 mm bore, 26 mm outside diameter and 8 mm width.
• Universal Parts 80mm Band Brake Assembly (110-7)
  E300: Match original drum, anchor, mount and cable. 80 mm band brake assembly.
• Universal Parts #25H Heavy-Duty Drive Chain - 47 Links (115-12)
  E300: Match chain, sprockets and link count. #25H heavy-duty 47-link drive chain.
• Universal Parts Handlebar Grips With Thumb Throttle; Razor (119-147)
  E300: Version 1 only. Grips for thumb-tab throttle.
• Universal Parts Electrical Kit for Razor E200/E300/Pocket Mod (119-151)
  E300: Version 11 and versions 13+. Matched electrical kit. Install paired controller and throttle, verify harness and mount.
• ZK2430-D-FS Controller for Razor E200/E300/MX350/MX400 (119-153)
  E300: Version 20+, matching label and wiring. 24V ZK2430-D-FS module, seven connections, W13113601015.
• Universal Parts Brake Lever for Razor E200/E300 (119-154)
  E300: Supplier lists all versions. Brake lever. Match original cable mount and cutoff.
• Universal Parts Electric Motor for Razor E300 V36+ (24V, 250W) (119-181)
  E300: Version 36+, match mount, sprocket and wiring. 24V 250W replacement motor.
• Universal Parts Chain Tensioner for Razor E300 (V36+) (119-208)
  E300: Version 36+. Chain tensioner. Match mount and chain alignment.
• Razor E200/E300 4-Pin Wire Harness by Universal Parts (119-215)
  E300: Versions 5–10 and 12 only. Four-pin battery wire harness.
  E300S (Front & Rear): Versions 5–10 and 12 only. Four-pin battery wire harness.
• Razor E200/E300 2-Pin Wire Harness by Universal Parts (119-216)
  E300: Version 11 and versions 13+. Exclude 12. Two-pin battery wire harness.
  E300S (Front & Rear): Version 11 and versions 13+. Exclude 12. Two-pin battery wire harness.
• Universal Parts On/Off Switch with Light Indicator (119-217)
  E300: Version 1+. Lighted power switch. Compare terminals and cutout.
  E300S (Front & Rear): Version 1+. Lighted power switch. Compare terminals and cutout.
• Universal Parts 3-Wire Charger Port for Razor (119-223)
  E300: Version 1+, match mount and wiring. Three-wire charging port, three-prong male socket.
• Universal Parts 4-Pin Twist Grip Throttle for Razor (119-224)
  E300: Version 20+. Single-speed four-pin male twist throttle.
• Universal Parts 20A Reset Switch for Razor (119-228)
  E300: Versions 10–11 and 13+. Exclude 12. 20A reset switch.
• Razor E200, E300 & Pocket Mod Headset Bearing Set (119-231)
  E300: Version 1+, match original geometry. Replacement headset bearing set.
• Handlebar Grip Set for Razor Scooters (119-235)
  E300: Version 2+. 21 mm grip set for twist throttle.
  E300S (Front & Rear): Version 2+. 21 mm grip set for twist throttle.
• Variable Speed Twist Grip Throttle for Razor Pocket Mod, E200/E300/E500S (119-256)
  E300: Versions 2–7. Variable-speed twist throttle. Verify wiring and connector.
  E300S (Front & Rear): Versions 2–7. Variable-speed twist throttle. Verify wiring and connector.
• Razor 14 AWG Red Battery Jumper Wire E100/200/300 (119-264)
  E300: Match original leads and terminals. 14 AWG red battery jumper, 40 cm and ¼-inch terminals.
  E300S (Front & Rear): Match original leads and terminals. 14 AWG red battery jumper, 40 cm and ¼-inch terminals.
• UP 3-Pin, 2-Wire Battery Wiring Harness for Razor - Parallel Pins (119-265)
  E300: Match original connector and pin layout. Battery harness, three-pin housing, two wires, side-by-side pins.
  E300S (Front & Rear): Match original connector and pin layout. Battery harness, three-pin housing, two wires, side-by-side pins.
• Universal Parts Black Battery Jumper Wire, 14 AWG for Razor (119-267)
  E300: Match original leads and terminals. Black 14 AWG battery jumper, 20 cm and ¼-inch terminals.
  E300S (Front & Rear): Match original leads and terminals. Black 14 AWG battery jumper, 20 cm and ¼-inch terminals.
• Universal Parts 9in Front Wheel Assembly - Razor E300 V41+ (119-29)
  E300: Version 41+, confirm original 2.80/2.50-4 fitment. Complete 9-inch front wheel.
• Universal Parts Razor E300 65T Rear Wheel Assembly (119-49)
  E300: Versions 1–35 as listed by supplier, with matching original drive. Rear wheel assembly with 65-tooth sprocket.
• Universal Parts 60.5" Brake Cable (119-6)
  E300: Match original length, ends and routing. Brake cable, 60.5-inch sleeve and 66-inch overall length.
• Universal Parts Tire Valve Adaptor (119-74)
  E300: Tire-inflation service accessory for accessible Schrader valves; not a vehicle-specific replacement. 100 mm flexible valve extension. Check valve thread and clearance. No tire, tube or pressure specification is implied.
  E300S (Front & Rear): Tire-inflation service accessory for accessible Schrader valves; not a vehicle-specific replacement. 100 mm flexible valve extension. Check valve thread and clearance. No tire, tube or pressure specification is implied.
• Universal Parts #25H Drive Chain 47 Links - Razor E300 (119-9)
  E300: E300 and E300S named explicitly; match the original chain length. #25H closed-loop chain with 47 outer links. Not a blanket fit for every gearing or wheel version.
  E300S (Front & Rear): E300 and E300S named explicitly; match the original chain length. #25H closed-loop chain with 47 outer links. Not a blanket fit for every gearing or wheel version.
• Razor E300 Scooter 55 Tooth Sprocket | Universal Parts (127-34)
  E300: Matching 55T assembly only. Confirm mount, offset and chain. 55-tooth rear sprocket for #25/#25H chain.
• Universal Parts 55 Tooth Sprocket for Razor E300 (127-41)
  E300: Only on the matching 55T configuration. 55-tooth sprocket for #25 chain.
  E300S (Front & Rear): Only on the matching 55T configuration. 55-tooth sprocket for #25 chain.
• Universal Parts 11-Tooth Motor Sprocket - Razor MX350/MX400 (127-7)
  E300: E300 named explicitly; match the original motor shaft and sprocket. 11 teeth, #25/#25H, double-D bore 8.6 mm flat-to-flat and 10 mm round-to-round.
• Universal Parts 2.80/2.50-4 Inner Tube - 90° Valve Stem (136-121)
  E300: Front or rear with matching tire, rim and valve clearance. 2.80/2.50-4 tube with 90° valve.
• Kenda 3.00-4 Inner Tube - Angled Valve (136-59)
  E300: Match original 3.00-4 tire and valve clearance. Kenda 3.00-4 tube with angled valve.
• Kenda K671F 3.00-4 Street Tire Razor E300 Pocket Rocket (154-104)
  E300: Front or rear with matching original 3.00-4 wheel. Kenda K671F 3.00-4 tire. Source model list: E300 & E300S (Front & Rear), Mini Chopper (Rear), Pocket Rocket (Front & Rear) The Kenda K671F 3.00-4 is a tube-type street tire built for electric scooters, mobility aids, go-karts, and utility equipment using 4" rims. The K671F tread pattern delivers smooth handling and reliable traction on paved surfaces, while 4-ply construction and a 60 PSI rating ensure durability under regular use. Requires an inner tube — sold separately.
  E300S (Front & Rear): Front or rear with matching original 3.00-4 wheel. Kenda K671F 3.00-4 tire. Source model list: E300 & E300S (Front & Rear), Mini Chopper (Rear), Pocket Rocket (Front & Rear) The Kenda K671F 3.00-4 is a tube-type street tire built for electric scooters, mobility aids, go-karts, and utility equipment using 4" rims. The K671F tread pattern delivers smooth handling and reliable traction on paved surfaces, while 4-ply construction and a 60 PSI rating ensure durability under regular use. Requires an inner tube — sold separately.
• Universal Parts 2.80/2.50-4 Tire - Razor E300 & E-XR (154-299)
  E300: Version 41+ with matching original size. Supplier includes V40, which needs confirmation because Razor separates V1–40 from V41+. 2.80/2.50-4 pneumatic tire.
• Kenda Brand K471 3.00-4 Street Tire (154-89)
  E300: Front or rear only where the original tire is 3.00-4. Kenda K471 tube-type, matching 4-inch rim and clearance; a correctly sized tube is required. Follow vehicle operating pressure, not the tire maximum.
  E300S (Front & Rear): Front or rear only where the original tire is 3.00-4. Kenda K471 tube-type, matching 4-inch rim and clearance; a correctly sized tube is required. Follow vehicle operating pressure, not the tire maximum.
• Clever Brand 3.00-4 Tire & Tube Combo (154-9)
  E300: Match original pneumatic tire and valve clearance. Clever 3.00-4 tire and tube set.
• Kenda K473 2.80/2.50-4 Tire - Tube-Type (154-97)
  E300: Match original tire size, 4-inch rim and clearance. Kenda K473 2.80/2.50-4 tube-type tire.
• Razor 3-Prong Charger Port | Universal Parts (210-9)
  E300: Matching threaded port only. Threaded three-pin male charge port, W25141012106.
• Razor MY1016 Drive Motor 24V 250W | Universal Parts (220-21)
  E300: Versions 1–35, match original motor, mount and wiring. 24V 250W MY1016 chain-drive motor.

No matter which razor scooter you own, finding the suitable parts is very essential. Wrong parts can damage the scooter and decrease the performance and durability. Typically you have to search a lot to find the right part suitable for your scooter’s model. However, you can be relieved of that struggle by shopping at AZ Scooter Parts. All parts of E300 & E300s razor scooter are available here.

 AZ Scooter Parts makes sure that the customers get the parts they need with ease. Battery, brake lever, chain lubes, grip set, motor, throttle, wheels and more – all parts for E300 & E300s razor scooter available on reasonable prices. The good quality of products ensures the better performance of your scooter.

Browse through the inventory, your desired razor scooter parts for E300 & E300s are merely a few clicks away! For more information and details on scooter parts, feel free to contact us here and we will be happy to guide you in making the right choice for your scooters. 

In order to find out which version of the Razor Scooter you own, follow this simple direction. 
Locate the bar code of your scooter and check the numbers that are written between the two dashes. For example, 400210-41-XXXXXXXXXXX, here 41 is the number you are looking for. This number indicates the version of your scooter.

In case of further help in determining the version of your scooter or finding the right part for it, please feel free to contact us here.