E200 & E200s

Model and version requirements

Match the exact model, production version and original part. Production version is not model year. The supported finder matches are listed below; retained items without a listed match still require confirmation.

• CST Brand 200x50 Tire & Tube - Razor Crazy Cart, E100, E200 (0600-6008)
  E200: Front or rear with matching original. CST 200x50 pneumatic tire and tube set with bent Schrader.
• CST 200x50 Tube-Type Tire (8x2) for Razor E-Scooters (0600-6024)
  E200: Match original pneumatic wheel. CST 200x50 tube-type tire. Match original size and fit separate tube. Tube-type — requires a separate inner tube (not included) Note: This is a tube-type tire — an inner tube is required. Check the inside of your rim for burrs before mounting to avoid pinch flats. Source model list: Crazy Cart, E100, E125, E150, E175, E200, E200S, E225, Dune Buggy
• CST 200x50 Inner Tube: Razor Crazy Cart & E200 (0600-6025)
  E200: Match original tire and valve clearance. CST 200x50 tube with 90° bent Schrader.
• Universal Parts Battery Adapter for Razor Electric Vehicles (104-11)
  E200: Versions 8–12, matching wiring. Battery adapter harness for two cells in a 24V pack.
• Universal Parts 608-ZZ Bearing ABEC-5 - Razor Scooters (105-26)
  E200: Match installed bearing and hub position. 608-ZZ bearing, 8 × 22 × 7 mm.
• Universal Parts Electric Scooter Thumb Throttle - 3 Wire (109-4)
  E200: Only with original matching three-wire Hall system. Compare pinout and control type. Three-wire Hall-effect thumb throttle.
• Universal Parts 80mm Band Brake Assembly (110-7)
  E200: Match original drum, anchor, mount and cable. 80 mm band brake assembly.
• Universal Parts #25H Heavy-Duty Drive Chain - 47 Links (115-12)
  E200: Match chain, sprockets and link count. #25H heavy-duty 47-link drive chain.
• Universal Parts #25 Roller Chain | 5 ft Length (115-5-5FT)
  E200: Only for matching #25 chain and sprocket. Cut to length. Bulk #25 chain, 5 feet.
• Universal Parts Handlebar Grips With Thumb Throttle; Razor (119-147)
  E200: Versions 1–4. Grips for thumb-tab throttle.
• Universal Parts Electrical Kit for Razor E200/E300/Pocket Mod (119-151)
  E200: Version 13+. Matched electrical kit. Install paired controller and throttle, verify harness and mount.
• ZK2430-D-FS Controller for Razor E200/E300/MX350/MX400 (119-153)
  E200: Version 24+, matching label and wiring. 24V ZK2430-D-FS module, seven connections, W13113601015.
• Universal Parts Brake Lever for Razor E200/E300 (119-154)
  E200: Supplier lists all versions. Brake lever. Match original cable mount and cutoff.
• Universal Parts Chain for Razor E200, V36+ (119-159)
  E200: Version 36+, match chain and link count. Version-specific drive chain.
• Razor Electric Motor- E200, E225, E275 by Universal Parts (119-160)
  E200: Version 5+, chain drive only. Match original motor and connector. 24V 200W chain-drive motor.
• Universal Parts 24V, 200W Electric Motor (119-18)
  E200: Versions 1–4, belt drive only. 24V 200W MY1025 motor with belt gear.
• Razor E200/E300 4-Pin Wire Harness by Universal Parts (119-215)
  E200: Versions 8–12. Four-pin battery wire harness.
• Razor E200/E300 2-Pin Wire Harness by Universal Parts (119-216)
  E200: Version 13+. Two-pin battery wire harness.
• Universal Parts On/Off Switch with Light Indicator (119-217)
  E200: Version 1+. Lighted power switch. Compare terminals and cutout.
• Universal Parts 3-Wire Charger Port for Razor (119-223)
  E200: Version 1+, match mount and wiring. Three-wire charging port, three-prong male socket.
• Universal Parts 4-Pin Twist Grip Throttle for Razor (119-224)
  E200: Version 24+. Single-speed four-pin male twist throttle.
• Universal Parts 20A Reset Switch for Razor (119-228)
  E200: Version 13+. 20A reset switch.
• Razor E200, E300 & Pocket Mod Headset Bearing Set (119-231)
  E200: Version 1+, match original geometry. Replacement headset bearing set.
• Handlebar Grip Set for Razor Scooters (119-235)
  E200: Version 5+. 21 mm grip set for twist throttle.
• Universal Parts Chain Tensioner for Razor E200 (V36+) (119-236)
  E200: Version 36+, match original. Chain tensioner.
• Variable Speed Twist Grip Throttle for Razor Pocket Mod, E200/E300/E500S (119-256)
  E200: Versions 5–9. Variable-speed twist throttle. Verify wiring and connector.
• Razor 14 AWG Red Battery Jumper Wire E100/200/300 (119-264)
  E200: Match original leads and terminals. 14 AWG red battery jumper, 40 cm and ¼-inch terminals.
• UP 3-Pin, 2-Wire Battery Wiring Harness for Razor - Parallel Pins (119-265)
  E200: Match original connector and pin layout. Battery harness, three-pin housing, two wires, side-by-side pins.
• Universal Parts Black Battery Jumper Wire, 14 AWG for Razor (119-267)
  E200: Match original leads and terminals. Black 14 AWG battery jumper, 20 cm and ¼-inch terminals.
• Universal Parts Front Wheel for Razor E100/E125/E150/E175/E200 (119-27)
  E200: Version 1+. Complete 200x50 front wheel, W13112099049. Verify original hub and axle.
• Razor E200 Belt Drive Rear Wheel Assembly by Universal Parts (119-32)
  E200: Belt-drive build only, match original axle and belt hardware. Belt-drive rear wheel assembly.
• Universal Parts 60.5" Brake Cable (119-6)
  E200: Match original length, ends and routing. Brake cable, 60.5-inch sleeve and 66-inch overall length.
• Universal Parts Tire Valve Adaptor (119-74)
  E200: Tire-inflation service accessory for accessible Schrader valves; not a vehicle-specific replacement. 100 mm flexible valve extension. Check valve thread and clearance. No tire, tube or pressure specification is implied.
• Razor E200 Performance 47 Tooth Sprocket | 3-Bolt Hub (127-3)
  E200: New-style chain-drive wheel only, compare original pattern and offset. 47-tooth sprocket with three-bolt hub.
• Universal Parts 55-Tooth #25 Chain Scooter Sprocket | E200 (127-9)
  E200: Chain-drive rear wheel only, match mount and tooth count. 55-tooth sprocket for #25 chain. Chain drive, rear wheel mount
• Kenda 200x50 Inner Tube - Angled Valve 90° (136-51)
  E200: Match original tire and valve clearance. Kenda 200x50 bent-valve tube. This product is only available for sale in the United States, Canada, and associated U.S. Territories. Kenda 200x50 inner tube with a 90° bent JS-87 valve stem, designed for the small-diameter wheels found on Razor electric scooters, crazy carts, and similar stand-up and sit-down electric vehicles. The bent valve stem clears tight wheel wells where a straight stem won't fit. Sold as a single tube. 90° bent JS-87 valve stem — clears tight wheel wells where straight stems won't fit
• Qind Brand 200x50 Tire & Tube Combo (154-1)
  E200: Match original pneumatic wheel. Qind 200x50 tire/tube set with angled valve.
• Kenda Brand K301 200x50 Low Rolling Resistance Tire (154-241)
  E200: Match original pneumatic wheel, load and pressure requirements. Kenda K301 200x50 tube-type tire.
• Kenda K909 200x50 Tire - Razor / Universal (154-91)
  E200: Match original pneumatic tire and rim. Kenda K909 200x50 tube-type tire.
• Razor 3-Prong Charger Port | Universal Parts (210-9)
  E200: Matching threaded port only. Threaded three-pin male charge port, W25141012106.

Good quality electric scooter parts result in better performance of your razor scooter. Finding a suitable part for your scooter can be a time consuming and tricky task. You probably won’t find all the parts from a single place and you will end up visiting different vendors to find different parts. However, you can buy almost all the parts for E200 & E200s razor electric scooter at AZ Scooter Parts.

You can find a battery, brake lever, grip set, throttle, tire and tubes for E200 & E200s razor electric scooters at AZ Scooter Parts. The prices of all these quality parts are competitive and reasonable and will definitely enhance the performance and durability of your scooter. 

Browse through the long list of items and find the suitable one for your razor scooter within a few minutes. This will save you the time and stress of going from vendor to vendor to find the suitable parts. If you have questions regarding razor electric scooters and parts, don’t hesitate to contact us here. 

In order to find out which version of the Razor Scooter you own, follow this simple direction. 
Locate the bar code of your scooter and check the numbers that are written between the two dashes. For example, 400210-41-XXXXXXXXXXX, here 41 is the number you are looking for. This number indicates the version of your scooter.

In case of further help in determining the version of your scooter or finding the right part for it, please feel free to contact us here.